Sanitary Valves News

By: wynnevawang | June 05, 2017

Sanitary ball valve, automatic or manual ball valve, widely used in beer, beverages, dairy products, fruit juice, pharmaceutical, biological engineering and other fields. Adamant valves introduced the relevant knowledge on how to extend the service life of the sanitary ball valve is as follows.
  
In the process of using high pressure ventilation valve will not make the products by small threat, when more and more threats, it will cause damage to the ventilation valve, it will make a shorter life; so we must have the ventilation valve has a long life consciousness. When in use, do not make a small opening in the valve working condition, because of the small opening in the gap, the effect on throttling wages will be smaller, but also...

By: wynnevawang | March 22, 2017

Classification of Valves Application
Although valves are often classified according to their functions, they are sometimes classified according to application. The use of three categories: general valve, the valve is designed for multiple uses, it can be applied to a large number of operations without modification; the special condition of the valve, the sanitary ball valve is designed for special purposes; serious conditions for highly valve, designed to avoid side operation with difficulty.
  
General operating valve
The general condition of the valve are those most common operation design of the valve, its rated pressure is low, the American National Standards Institute (ANSI) level 150 to level 600, medium temperature rating in -...

By: wynnevawang | January 23, 2017

Pneumatic ball valves
【Flanged Pneumatic Ball Valve】
Pneumatic flange ball valve is a GT-type, AT-type pneumatic piston cylinder and was 90 ° rotating ball valve directly from the combination. When the ball rotates 90 degrees, in the entrance and exit should be all spherical, thereby cutting off the flow, on the contrary both show through-hole, so that the media through.
【Pneumatic ball valve with internal thread】
Pneumatic internal thread ball valve is composed of double (single) action pneumatic piston actuator and internal thread ball valve. The valve body can be divided into integral, two-stage, three-stage.
【Stainless steel pneumatic valve】
Pneumatic stainless steel flange ball valve by the angle of pneumatic actuators and stainless steel b...

By: wynnevawang | December 12, 2016

  Ball valve is closed as the sphere of the health-class butterfly valve. The main function of the ball valve is to cut off and connect the fluid in the pipeline. Ball valve is featured by small fluid resistance, good sealing, fast switching and high reliability.
     Ball valve is mainly composed of valve, stem, ball and sealing ring and other components, is a 90 ° switch cut valve, which by means of the handle or drive device in the upper end of the stem exert a certain torque and passed to the ball, it rotated 90 °, The through hole of the sphere is coincident with or perpendicular to the center line of the valve body passageway, and the full opening or full closing action is completed. Ball valve structure commonly used floating ball and...